Why should the stop valve have low inlet and high outlet?
stop valve, also known as stop valve , is a forced-sealing valve, which is a kind of stop valve . According to the connection method, i...
In real life, what should we do when the water pump fails? Let me explain to you some knowledge in this area. The so-called control valve instrument faults can be roughly divided into two categorie...
What aspects should be paid attention to when installing the butterfly valve? First, after opening the package, the Taike butterfly valve cannot be stored in a humid warehouse or open air envi...
Fault: sealing surface leakage
1. The butterfly plate and sealing ring of the butterfly valve contain sundries.
2. The closing position of the butterfly plate and seal of the butterfly valve is not...
Valves are an important part of the pipeline system, and metal valves are the most widely used in chemical plants. The function of the valve is mainly used for opening and closing, throttling and e...
The H71W wafer check valve produced by Taike Valve Co., Ltd. is composed of valve body, disc, spring and so on.
The valve is installed horizontally or vertically in the pipeline system to prevent...