News
-
Advantages of TAIKE Valve Pneumatic Three Piece Ball Valve
Advantages of pneumatic three piece ball valve: 1. The fluid resistance is small, and its resistance coefficient is equal to that of pipe sections of the same length. 2. Simple structure, small size, and light weight. 3. Tight and reliable, the sealing surface material of the ball valve is widely...Read more -
The characteristics and usage of Taike valve Y-type filter!
The Y-shaped filter produced by Taike Valve Co., Ltd. is an indispensable filtering device in the pipeline system for conveying media. It is usually installed at the inlet of pressure reducing valves, relief valves, constant water level valves, or other equipment to remove impurities in the media...Read more -
Characteristics of Taike Valve Internal Thread Ball Valve
Structural characteristics of internal threaded ball valves 1. According to the structure of the valve body, the internal threaded connection ball valve is divided into one piece, two pieces, and three pieces; 2. The valve body and cover adopt advanced silicon solution casting techn...Read more -
TKYCO Valve H71W Wafer Check Valve
The H71W wafer check valve produced by Taike Valve Co., Ltd. is composed of valve body, disc, spring and so on. The valve is installed horizontally or vertically in the pipeline system to prevent the medium from flowing back. It has the advantages of short structure, small size, light weight,...Read more -
Advantages, disadvantages, and installation precautions of shut-off valves
Taike valve globe valves have the following advantages: The shut-off valve has a simple structure and is relatively convenient for manufacturing and maintenance. The shut-off valve has a small working stroke and a short opening and closing time. The shut-off valve has good sealing performance, lo...Read more -
Working Principle and Classification of Taike Valve Check Valves
Check valve: Check valve, also known as one-way valve or check valve, is used to prevent the medium in the pipeline from flowing back. The bottom valve for water pump suction and closing also belongs to the check valve category. A valve that relies on the flow and force of the medium to open or c...Read more -
The correct installation steps for TKYCO Taike valve electric flange butterfly valve!
TKYCO electric flange butterfly valves are widely used as opening and closing equipment in water supply and drainage systems in industries such as tap water, sewage, construction, and chemical engineering. So, how should this valve be installed correctly? 1. Place the valve between two pre instal...Read more -
Advantages, disadvantages, installation and maintenance of Taike valve butterfly valve
Taike valve butterfly valve can be divided into pneumatic butterfly valve, electric butterfly valve, manual butterfly valve, etc. Butterfly valve is a type of valve that uses a circular butterfly plate as the opening and closing component and rotates with the valve stem to open, close, and regula...Read more -
Application of Taike Valve Stop Valve in High Pressure Grouting Accident Treatment
During high-pressure grouting construction, at the end of grouting, the flow resistance of cement slurry is very high (usually 5MPa), and the working pressure of the hydraulic system is very high. A large amount of hydraulic oil flows back to the oil tank through the bypass, with the reversing va...Read more -
The difference between Taike valve rising stem gate valve and non rising stem gate valve
Taike valve gate valves can be divided into: 1. Rising stem gate valve: The valve stem nut is placed on the valve cover or bracket. When opening and closing the gate plate, the valve stem nut is rotated to achieve the lifting and lowering of the valve stem. This structure is beneficial to the lub...Read more -
Introduction to the working principle of Taike valve stainless steel ball valve
What is the working principle of Taike valve stainless steel ball valve? As we all know, stainless steel ball valves are widely used as a new type of valve. Stainless steel ball valves require only 90 degrees of rotation and a small rotational torque to close tightly. The completely equal valve b...Read more -
The main difference between butterfly valve and gate valve!
Taike Valve Co., Ltd. is a Sino-foreign joint venture. What is the main difference between the butterfly valve and gate valve produced? The following Taike Valve editor will tell you in detail. There are eight differences between butterfly valves and gate valves, which are different action method...Read more